For Palisade Impact Air 45, send the full instrument marking and identify the removed bearing or assembly before ordering.
The part drawing and supply scope can be checked with your enquiry.
Looking for a replacement part for Palisade Impact Air 45? Use this page to identify the instrument and removed component before requesting a quote. A model name narrows the search; the exact bearing or assembly still needs to be matched to a specific candidate.
For this request: Record the full Impact Air 45 marking, manufacturer label and turbine reference. Specify whether the requested component is a loose bearing or a complete turbine; this page does not establish a clinical-use or cross-model compatibility claim.
| Item | Details to provide |
|---|---|
| Instrument | Full brand, model, suffix and a clear label photo. |
| Assembly | Turbine, rotor, cartridge or attachment reference; identify the requested supply scope. |
| Removed part | Complete code and suffix, photos of both faces, and front / rear or other assembly position if known. |
| Dimensions | Drawing or measured bore, outside diameter and width, with any flange or closure details. State the measurement source. |
| Order | Required quantity, destination country and documentation needs. |
Compare the candidate part drawing and construction with the removed component and the exact instrument service information. Matching nominal dimensions is a screening step; it does not confirm tolerance, closure, cage, lubrication, assembly requirements or interchangeability. Do not transfer a specification from a neighbouring model.
Materials, precision class, operating limits and reprocessing suitability must be confirmed for the exact offered part. The handpiece manufacturer’s instructions determine the applicable service and reprocessing route. A bearing change alone is not a promise to restore the performance of the complete instrument.
Use the form on this page to send the full model, old part code and required quantity. Use the Email link for photos or drawings. If the old part is unmarked, say so and include measurements and clear photos. Ask for the candidate code, available drawing, supply scope, current availability and quotation terms before ordering.
No. Record the full Impact Air 45 marking, manufacturer label and turbine reference. Specify whether the requested component is a loose bearing or a complete turbine; this page does not establish a clinical-use or cross-model compatibility claim.
Yes. Provide the full instrument and assembly identifiers, both-face photographs and identified measurements. These can support a candidate review; compatibility remains subject to confirmation.
Continue with the relevant bearing and model guide, or send a specific part enquiry. Brand names identify the instrument being discussed and do not state OEM manufacture, approval or affiliation.
Our FAQ section covers common questions about our dental bearings, including types, materials, quality control, customization, and global shipping to help you make informed decisions.
Provide the exact handpiece model and existing bearing code for a model-specific review.
Ask whether a material specification is available for the exact bearing code.
Compare the applicable product documents for the exact items, if available; confirm the intended handpiece model separately.
Ask whether model-specific service-life evidence is available. A general interval may not apply to an individual item.
Ask for current documents identifying the responsible entity, scope and applicable product before relying on a compliance statement.
Ask whether test results are available for the exact bearing model before relying on a performance value.
For a specific bearing, request the applicable drawing, material and tolerance information, inspection criteria, and any available test report. Share the handpiece model and bearing code so the documents can be matched to the exact part. Test coverage and acceptance limits vary by item.
Lead time depends on the exact part number, quantity, and stock or production status. Include your destination and required date in the RFQ and request a written lead-time confirmation for that order.
For a nonstandard bearing, send a drawing or sample, the required dimensions and tolerances, estimated quantity, and application details. Feasibility, material options, minimum order quantity, and documentation must be confirmed for the specific request.
Follow the handpiece manufacturer’s instructions for cleaning, lubrication, sterilization, and service intervals. Maintenance requirements can vary by handpiece and bearing assembly; use the applicable IFU for your exact model.
For volume pricing, specify the exact bearing code or drawing, estimated order quantity, and delivery schedule. Request a quotation with the applicable quantity breaks and terms.
Include the destination country and quantity in your inquiry. Available shipping methods, cost, import responsibilities, and delivery time should be confirmed in the quotation.
For bearing inquiries, provide the exact model or existing bearing code. Request the applicable specification and supporting documents before ordering.
Start with the exact handpiece brand and model, and record the code printed on the removed bearing if it is legible. A model name alone may cover several turbine or cartridge revisions, so include photos of the original part and its mounting position when available.
Compare the proposed bearing with the original drawing or measured sample: bore, outside diameter, width, flange geometry, shields, cage, and any markings. Material, lubrication, and sterilization requirements need part-specific confirmation; do not infer them from a similar-looking model or product photo.
For an accurate quotation, send the bearing code or handpiece model, photos or a drawing, required quantity, destination country, and the application or repair issue. If you need a complete turbine, cartridge, or rotor rather than a loose bearing, state that clearly in the inquiry.
Before ordering, request the specification and available inspection or test documents for the exact part number. Confirm sample availability, lead time, shipping terms, and any compatibility statement in writing. Send your part details for review and a quotation.
