KaVo 6000M / 7000M Bearing Identification & Quote Request
Need a replacement bearing for a KaVo Mastermatic 6000M or 7000M? Identify the exact handpiece, turbine or cartridge reference and the bearing position before selecting a replacement. Send the old bearing code or drawing for a model-specific review and quote.
- Handpiece: complete model label and suffix.
- Assembly: turbine, cartridge or attachment reference.
- Bearing: old code, mounting position and drawing or measurements.
- Quote: quantity, destination and any required documents.
A 6000M or 7000M model reference starts the search; it does not identify every bearing in the assembly. Record whether you need a head bearing, an intermediate-shaft bearing or a complete assembly, and keep the removed part associated with its original position.
Compare the proposed part with the applicable drawing and service documentation. Similar dimensions, a shared series code or a photograph do not establish fit. Confirm the exact item and any material, lubrication or reprocessing requirements before ordering.
Order Terms
Confirm warranty and return terms in the current written quotation.
Shipping Options
Provide the destination and confirm current availability and dispatch timing.
Fit Confirmation
Match the exact bearing and assembly references before ordering.
Part Documents
Specify the drawing, material or inspection records you need for the exact item.
Information Needed for a 6000M / 7000M Bearing Quote
| Handpiece reference | Complete 6000M or 7000M model label, suffix and assembly reference. |
|---|---|
| Bearing location | Head, intermediate shaft or another position; include an assembly photo or drawing. |
| Old part identification | Legible bearing code, original part reference and photos of both sides. |
| Dimensions and geometry | Bore, outside diameter, width and any flange or shield details from the applicable drawing or measured sample. |
| Fit and material evidence | Request the proposed item code, specification and documented fit scope before ordering. |
| Quote details | Quantity, destination, required documents and whether you need loose bearings or a complete assembly. |
Check the Bearing and Assembly Together
Check the complete assembly: the handpiece operating specification is not a rating for an unidentified loose bearing. Ask for a specification tied to the proposed bearing code, including geometry, materials and any stated operating limits.
Confirm the repair scope: identify the original bearing position and associated shaft or cartridge. Use the manufacturer’s model-specific service and reprocessing instructions; a material name alone does not establish sterilization suitability.
Browse KaVo bearing references or send the model and old-part details for review.
FAQ
Do these bearings fit the older KaVo GENTLEpower 25LPR?
Do not assume interchangeability between the 6000M, 7000M and GENTLEpower 25LPR from a family name or similar dimensions. Each proposed handpiece-to-bearing pairing needs its own part reference, drawing or documented fit evidence. Send both the original and proposed item codes for review.
What information is needed if a 6000M or 7000M handpiece runs hot?
Heat is a symptom, not a bearing specification. The handpiece model, assembly condition and service history are needed to assess the repair. Do not assume that changing ball material will resolve the cause. Have qualified service personnel follow the manufacturer’s troubleshooting and service instructions before selecting replacement parts.
Do you sell the intermediate shaft bearings?
State whether you need a head bearing, an intermediate-shaft bearing or a complete assembly. Send the complete model, shaft or cartridge reference, original bearing code and quantity. Availability and the proposed item specification need to be confirmed for that exact request.